Answers to common questions about Standard Manufacturing 1911 pistols, made in New Britain, Connecticut: break-in, ammunition, parts, sights, finishes and custom work.
What is the break-in period for my 1911?
We recommend a break-in period for all our 1911 models due to the tight tolerances of the part fitting process.
- Load and unload magazines to help set the follower spring. Leave the magazine loaded for a few days prior to the first shooting. This will help make the magazine easier to load.
- Lubricate the slide rails and barrel hood lightly prior to shooting to reduce friction.
- Shoot 200-300 rounds before disassembly and thorough cleaning.
- If you encounter any recurrent malfunctions, clean and lubricate the firearm regardless of round count.
- All firearms will require fresh lubricant when new due to most guns leaving the factory with minimal lubricant applied.
Why won't the slide stop drop on an empty magazine?
The follower spring in our magazines is made to ensure proper slide lock up upon firing the last round. The upward pressure from the follower spring is pushing up on the slide stop, and this is normal. Drop the magazine out of the well if you desire to close the slide, then reinsert the magazine.
What is the recommended ammunition for my 1911 .45 Pistol?
We recommend using new factory made full metal jacket (FMJ) 230 grain ammunition. This is what we use to test each gun and for our own personal shooting.
Where can I get replacement parts for my 1911 Pistol?
Any factory replacement parts are available through Standard Manufacturing. Some parts will require fitting and may need to come into our shop so our smiths can ensure proper fit and function. We suggest you contact our customer service team so that they can guide you in the right direction with the best solution to your needs.
Contact customer service with either of these two options:
860-225-6581, or general@stdgun.com .
What are your frames and slides made from?
All of our slides are made from solid 4140 carbon steel bar stock, and all of our frames (with the exception of the Damascus models) are made from forged 4140 carbon steel.
Even our triggers are machined here at our factory - steel and Damascus.









I have additional questions regarding my 1911 warranty service and repair. Who do I contact?
Our customer service team is ready to help you find the answers you are in need of. Our team works very closely with our smiths and production teams to make sure you have the most accurate and up to date answers available.
Reach out to us at: 860-225-6581, or general@stdgun.com.
What series are your 1911 pistols?
Our models are the series 70 version.
What are the sights used on your models and what are the dimensions?
Standard Manufacturing uses Novak sights on all of our models. The dimensions areas follows: (tptp = theoretical point to theoretical point)
Rear Sight - .495” tptp x 65° at .125” depth
Front Sight - .330” tptp x 65° at .075” depth



Should I have reason for concern about wear signs on my frame, slide and barrel?
Finish wear is normal and expected due to the contact certains parts have with each other. Our 1911 models have very tight tolerances so you will see wear due to friction and contact. We recommend keeping your 1911 lubricated and clean to prevent abnormal and excessive wear. Wear is not covered under our warranty.
Are there front serrations on the slides of current models?
All current models do not have front slide serrations. There may be some older models currently on the market that showcase the front slide serrations or special order requests.
How is the Damascus process done?
The wavy pattern that distinguishes Damascus steel from regular steel is achieved by layering iron and steel and forging the two metals together by hammering them at a very high temperature to form a welded bond. Our Damascus steel is machined, fit, polished and then plunged into a hot acidic bath which highlights the pattern of the waves of iron and steel. For more information, check out this clip:




Is the case coloring real?
All of our case coloring is real. We follow the practices of those before us in using authentic processes instead of a chemical treatment just for show. Our case coloring is done with high temperatures, bone meal and charcoal. For more information, check out this clip:







What is the turnaround time once I place an order for a 1911?
The turnaround time for your order will depend on the model you ordered and if there are any extravagances added, such as engraving, custom grips, etc.
Our production team strives to get your order out as quickly as possible because we appreciate our customers.
A standard model order can usually be expected within 1-2 weeks. An engraved model order can be expected within 2-4 weeks. And a nickel plated, or Damascus model can be expected within 4-6 weeks.
Please understand there may be times and situations out of our control where the expected delivery times may be longer than originally thought.
How is my 1911 engraved?
All our engraving patterns are designed by hand and laid out for approval to become a standard pattern to be engraved on our firearms. Once the pattern has been approved it is then transferred to our laser department where it is carefully designed in our CAD program. This ensures quality and consistency throughout the entire engraving process.


Are the internal parts of my 1911 MIM or Tool Steel?
Our internal parts are machined from bar stock in our factory.



Do we offer an ambidextrous safety?
Yes we do offer an ambidextrous safety. Contact our customer service department for more information at: 860-225-6581, or general@stdgun.com .
Are custom fittings and/or features available?
Yes, we strive to work with each and every customer to provide exactly what you are looking for. Just ask and we will see what we can make happen. Remember, due to certain tolerances and safety standards we may not be able to achieve all requests, but we will do what we can to make it happen.
Contact our customer service folks for more information at: 860-225-6581, or general@stdgun.com.